A brass wall sconce with a circular wall canopy and an elongated
vertical body — the silhouette is slender and upright, the proportions
leaning classical without relying on ornament. The fabric shade
sits at the arm tip, diffusing the E14 source into a soft, directional glow.
Available in five body finishes — black, brass, nickel, old white, and
white — each shifts the fixture between different interior registers, from
warm and period-appropriate to clean and contemporary.
Two configurations — single head and double head — share the same
60 cm height and 18 cm depth, differing only in width: the 1-head version sits
close to the wall at 14 cm; the 2-head version extends to 34 cm with a symmetric
arm on each side. Both are damp-rated, making them suitable for
bathrooms, covered outdoor entries, and any space with elevated humidity.
Finish — Choose at Checkout
Black
Brass
Nickel
Old White
White
The fabric shade is off-white on all finishes. Body finish only varies.
Size — Choose at Checkout
1 HeadSingle Arm
Depth14 cm5.5″
Width18 cm7.1″
Height60 cm23.6″
Bedrooms · Reading nooks · Hallways · Bathrooms · Any wall where a single accent point is preferred
2 HeadsDouble Arm
Depth34 cm13.4″
Width18 cm7.1″
Height60 cm23.6″
Bedside pairs · Vanity mirrors · Fireplace flanking · Positions where symmetric spread is preferred
Installation
💧
Damp-Rated — Bathroom & Humid Spaces Safe
This fixture is rated for damp locations — bathrooms,
covered outdoor entries, laundry rooms, and any interior space with elevated
humidity. It is not rated for direct water exposure (wet-rated). Standard ceiling
junction box mounting; installs as a hardwired wall fixture.
Bulbs are not included. Each arm uses one E14
candelabra socket. Note: E14 is the European/international candelabra base
standard — it is the same pin spacing as E12 (US) but a slightly larger
diameter. E12 and E14 bulbs are not interchangeable. Purchase
specifically E14 bulbs. Recommended: 4–6W LED E14 at 2700K warm
white, frosted or opal glass, for an even diffused glow through the
fabric shade.
Specifications
SKU
RDW-180327
Dimensions
1 head D 14 × W 18 × H 60 cm · ∅ 5.5″ × W 7.1″ × H 23.6″ 2 heads D 34 × W 18 × H 60 cm · ∅ 13.4″ × W 7.1″ × H 23.6″
Finish Options
Black · Brass · Nickel · Old White · White
Materials
Brass lamp body · Fabric lampshade
Socket
E14 candelabra · Bulbs not included · User-replaceable
Voltage
AC 110–240V · Universal
Location Rating
Damp-rated · Suitable for bathrooms and humid spaces
Mounting
Hardwired wall mount · Standard junction box
Best For
Bedrooms · Bathrooms · Hallways · Living rooms · Covered entries · Transitional and classic interiors
Black is the most graphic — the slender vertical silhouette
reads as a dark line against the wall, suiting contemporary, industrial, and dark-palette
interiors. Brass is warm and period-appropriate, suiting traditional,
transitional, and warm-neutral interiors. Nickel is cool and refined —
between black and chrome, it suits contemporary and minimalist spaces. Old White
has a slightly warm, aged tone — less stark than bright white, well-suited to
warm off-white or cream wall colors. White is the cleanest option,
reading as a deliberate neutral against white walls and ceiling.
1-head or 2-head — which should I choose? +
The 1-head (D 14 cm) sits close to the wall and reads as a single
accent point — best for bedside reading, hallway accent lighting, and anywhere
a narrow, unobtrusive profile is preferred. The 2-head (D 34 cm)
extends a symmetric arm to each side from the central canopy — it reads as a
wider, more balanced fixture and is the standard choice for vanity mirrors (one
fixture centred above or one on each side), fireplace flanking, and bedside use when
mounted between two beds.
Can I use it in my bathroom? +
Yes — this fixture is damp-rated, which means it is tested
and approved for use in spaces where moisture and humidity are regularly present, such
as bathrooms. It is suitable for installation above a vanity or on a bathroom wall away
from direct water spray. It is not wet-rated — do not install
it where it will be directly exposed to running water, such as inside a shower enclosure
or under an outdoor exposed rain area.
What bulb should I use, and what is E14? +
This fixture uses an E14 candelabra socket. E14 is the European
candelabra base standard and is slightly larger in diameter than the US E12 —
they are not interchangeable despite looking similar. Purchase bulbs specifically
labelled E14. A 4–6W LED E14 at 2700K warm white
with frosted or opal glass is the best choice — frosted glass produces an even
diffused glow through the fabric shade without a visible hotspot at the bulb. Avoid
clear-glass or bare-filament E14 bulbs, which can create uneven light distribution
through the shade.
Product features
Hand-finished in natural materials — alabaster, marble, brass, and blown glass — so slight variation in veining, grain, or patina between pieces is normal and expected.
Hardwired or plug-in per listing; check the individual product page for the exact wiring type and included cord length.
Compatible with standard dimmer switches unless the listing notes otherwise.
Bulb base type (e.g. E12, E26) is listed on each product page; bulbs are not included unless stated.
Select pieces are made to order — see the product page for current lead time before ordering.
Materials and care
Alabaster, marble & stone: dust with a soft, dry cloth. Avoid water and household cleaners — they can etch or stain natural stone.
Brass & metal finishes: wipe with a dry microfiber cloth. Avoid abrasive cleaners, which will strip the patina.
Fabric shades: spot clean only with a dry cloth.
Glass: apply a mild glass cleaner to a soft cloth, not directly to the fixture.
Always turn off and let the fixture cool before cleaning.
Keep fixtures away from direct moisture unless the listing specifies it's rated for outdoor or wet locations.
Styling tips
Wall sconces: mount at 60–66″ from the floor to the center of the fixture; space paired sconces 24–30″ apart.
Pendants: hang 30–36″ above a table or counter surface, adjusting for ceiling height.
Chandeliers: as a general sizing guide, allow roughly 2.5–3″ of fixture width for every foot of room width.
Warmer bulb temperatures (2700K–3000K) bring out the tone in natural materials like alabaster and brass.
Pairing with a dimmer switch gives you more control over ambiance in living and dining spaces.
