Statice Wall Lamp
Statice Wall Lamp
Couldn't load pickup availability
Brass · Tapered Linen Shade · Transitional Sconce
A wall sconce in the language of classic American transitional lighting — a square brass backplate anchors a horizontal bar from which one, two, or three arms extend, each ending in a tapered linen shade above a small tassel-tip finial. The composition is disciplined and graphic: one square, one or more horizontal arms, soft fabric cones at each light source.
The brass is hand-finished — bright on the polished arm tops, deeper at the recesses where light catches. Available in four finishes (Polished Brass, Matte Black, Brushed Nickel, White) and three configurations (1, 2, or 3 heads) to scale from a single bedside accent up to a wide vanity or hallway flank. Suited to bedside walls, hallway pairs, vanity mirrors, dressing rooms, and flanking pairs above console tables in transitional, traditional, and Hollywood Regency interiors.
Features
Tapered Linen Shades
Hand-stitched flared linen drum shades cast soft warm uplight on every arm.
Square Brass Backplate
Disciplined square plate anchors a horizontal bar — graphic, architectural, transitional.
1, 2, or 3 Heads
Scale from a single bedside accent to a wide-vanity triple-arm sconce.
Finish — Choose at Checkout
Polished Brass
Warm honey gold, as pictured — classic transitional and traditional warmth.
Matte Black
Soft matte black for modern, gallery, and high-contrast interiors.
Brushed Nickel
Cool silver tone with brushed grain — fresh in coastal and contemporary rooms.
White
Clean satin white — disappears into pale walls for a quieter installation.
Hand-finished metal & tapered linen shades. Each piece is finished by hand — subtle variation in tone and polish depth between finishes is part of the artisanal character. The flared linen shades are hand-stitched and may carry minor stitch-line variation. Multi-arm versions are factory-aligned for symmetry across the bar.
Product Notes
D 13 × W 18 × H 44.5 cm
1 Head · ∅ 5.1″ × W 7.1″ × H 17.5″
D 41 × W 18 × H 30.5 cm
3 Heads · ∅ 16.1″ × W 7.1″ × H 12″
| Materials | Hand-finished metal body · Tapered linen drum shades |
| Finish | Polished Brass · Matte Black · Brushed Nickel · White · choose at checkout |
| Style | American transitional · architectural · square-backplate sconce |
| Size — 1 Head | D 13 × W 18 × H 44.5 cm · ∅ 5.1″ × W 7.1″ × H 17.5″ |
| Size — 2 Heads | D 33 × W 18 × H 30.5 cm · ∅ 13″ × W 7.1″ × H 12″ |
| Size — 3 Heads | D 41 × W 18 × H 30.5 cm · ∅ 16.1″ × W 7.1″ × H 12″ |
| Backplate | D 11 × H 11 cm · ∅ 4.3″ × H 4.3″ · square |
| Shade Size | D 15 × H 18 cm · ∅ 5.9″ × H 7.1″ · tapered linen drum |
| Bulb Base | E14 candelabra socket per head · bulbs not included |
| Bulbs Recommended | Warm white 2700K–3000K LED candle bulb, max 40W incandescent equivalent each |
| Color Temperature | Depends on bulb chosen · warm white recommended for linen-shade glow |
| Dimming | Compatible if a dimmable bulb and TRIAC dimmer are installed |
| Voltage | AC 110–240V · universal |
| Mounting | Hardwired to wall junction box · square backplate covers most US single-gang boxes |
| SKU | RDW-160110 |
| Lead Time | Made-to-order · please refer to checkout estimate |
| Best For | Bedside walls · Hallway pairs · Vanity mirrors · Dressing rooms · Flanking pairs above consoles · Transitional, traditional & Hollywood Regency interiors |
Installation
- Hardwires to a standard wall junction box — professional installation recommended.
- Square backplate (D 11 × H 11 cm) covers most US single-gang boxes; verify before drilling.
- For bedside walls and hallways, install the 1-head version at 60–66″ above finished floor.
- For vanity use, center the 2-head or 3-head bar above the mirror midpoint at 75–80″ above finished floor.
- For flanking pairs above a console or mantel, install matching 1-head sconces evenly to either side at 6–9″ above the surface.
- Each linen shade clips onto its bulb-cup harp — install bulbs first, then snap shades on.
- Fits E14 candelabra-base bulbs — supply your own warm-white LED candle bulbs (one per head).
- Indoor only · clean linen shades with a soft brush; clean metal with a soft dry cloth.
Downloads
FAQ
How do I pick between 1, 2, and 3 heads? +
The 1-head (∅ 5.1″ × H 17.5″) is the slimmest version — a single tapered shade rising vertically from the backplate. Use it for bedside walls, hallways, narrow walls between doors, and flanking pairs to either side of a mirror or console. The 2-head (∅ 13″ wide bar) and 3-head (∅ 16.1″ wide bar) extend horizontally — better for wider walls, vanity mirrors, and gallery-style flanking installations.
What height should I install it at? +
For bedside walls and hallways, install at 60–66″ from finished floor to the center of the sconce. For vanity use above a mirror, the 2-head and 3-head versions center 75–80″ above finished floor with the bar across the mirror midpoint. For flanking pairs above a console table or fireplace mantel, center 6–9″ above the surface and space evenly on either side.
Is the Hillsdale dimmable? +
Yes, with the right bulbs. Each head takes an E14 candelabra-base bulb. Install dimmable LED candle bulbs on a TRIAC wall dimmer and the sconce dims smoothly across all heads. Warm white 2700K–3000K is recommended for the flattering linen-shade glow that the design depends on.
Which finish should I pick? +
Polished Brass (pictured) is the classic transitional finish — warm, reflective, suits wood floors, cream walls, and brass-toned hardware. Matte Black anchors modern, gallery, and high-contrast schemes. Brushed Nickel reads cooler and is fresh in coastal, contemporary, and pale-walled rooms. White disappears into the wall for the quietest installation — best when the linen shade should be the focal point.
What bulbs does it take, and how many? +
One E14 candelabra-base bulb per head — one for the 1-head version, two for the 2-head, three for the 3-head. We recommend warm-white 2700K–3000K LED candle bulbs at 40W incandescent equivalent each. Avoid daylight (5000K+) — it cools the linen tone and clashes with the warm-metal finishes.
Product features
Product features
- Hand-finished in natural materials — alabaster, marble, brass, and blown glass — so slight variation in veining, grain, or patina between pieces is normal and expected.
- Hardwired or plug-in per listing; check the individual product page for the exact wiring type and included cord length.
- Compatible with standard dimmer switches unless the listing notes otherwise.
- Bulb base type (e.g. E12, E26) is listed on each product page; bulbs are not included unless stated.
- Select pieces are made to order — see the product page for current lead time before ordering.
Materials and care
Materials and care
- Alabaster, marble & stone: dust with a soft, dry cloth. Avoid water and household cleaners — they can etch or stain natural stone.
- Brass & metal finishes: wipe with a dry microfiber cloth. Avoid abrasive cleaners, which will strip the patina.
- Fabric shades: spot clean only with a dry cloth.
- Glass: apply a mild glass cleaner to a soft cloth, not directly to the fixture.
- Always turn off and let the fixture cool before cleaning.
- Keep fixtures away from direct moisture unless the listing specifies it's rated for outdoor or wet locations.
Styling tips
Styling tips
- Wall sconces: mount at 60–66″ from the floor to the center of the fixture; space paired sconces 24–30″ apart.
- Pendants: hang 30–36″ above a table or counter surface, adjusting for ceiling height.
- Chandeliers: as a general sizing guide, allow roughly 2.5–3″ of fixture width for every foot of room width.
- Warmer bulb temperatures (2700K–3000K) bring out the tone in natural materials like alabaster and brass.
- Pairing with a dimmer switch gives you more control over ambiance in living and dining spaces.
Share
