A multi-arm chandelier composed around radial geometry — turned metal bases sit on antique-bronze arms that radiate from a central hub like the hands of a clock face. Each base supports a tapered velvet shade, with fabric available in three tones to set the room's temperature.
All-metal construction throughout, with a hand-applied antique-bronze finish across arms, bases, and the central column. The velvet shades soften the cool metalwork and add tactile warmth. Available in 3, 5, 6, or 8 head configurations.
Features
Electroplated coffee
Hand-finished Electroplated coffee tone across every arm and base — deep, warm, and rich in tonal variation.
Velvet Shades
Three premium velvet tones available to soften the light and metalwork.
Modular Drop
Adjustable suspension system to fine-tune the height for any ceiling.
Velvet Color — Choose at Checkout
Red Velvet
Warm, dramatic terracotta-rust.
Green Velvet
Rich, jewel-toned forest green.
Ivory White
Quiet, residential soft ivory.
Hand-Applied Finish. Each piece is hand-finished in antique bronze — subtle tonal variation across arms and bases is part of the character, not a defect.
Product Notes
∅ 57 × H 39.5 cm
3 Heads · ∅ 22.4″
∅ 70 × H 39.5 cm
5 Heads · ∅ 27.6″
∅ 85 × H 39.5 cm
6 Heads · ∅ 33.5″
∅ 105 × H 39.5 cm
8 Heads · ∅ 41.3″
Lampshade size
D 15cm x H 25cm / ∅ 5.9″ x H 9.8″
Materials
Metal · Wood · Fabric
Configuration
3, 5, 6, or 8 heads · Choose at checkout
Bulb Base
E12 (US) or E14 (EU) candelabra · Max 40W each
Suspension
7.9″ + 11.8″ + 19.7″ rods included · Stackable
Installation
Professional installation recommended for hardwired junction box.
Modular suspension rods can be combined to set drop height (up to 39.4″).
Velvet shades clip onto the bulb-cup harps after bulb installation.
The 3-head suits intimate spaces (10–14 m²). The 5/6-head fits standard dining rooms. The 8-head is built for grand entries and larger living areas.
Is it dimmable? +
Yes, when paired with dimmable LED candelabra bulbs and a compatible TRIAC wall dimmer.
Product features
Hand-finished in natural materials — alabaster, marble, brass, and blown glass — so slight variation in veining, grain, or patina between pieces is normal and expected.
Hardwired or plug-in per listing; check the individual product page for the exact wiring type and included cord length.
Compatible with standard dimmer switches unless the listing notes otherwise.
Bulb base type (e.g. E12, E26) is listed on each product page; bulbs are not included unless stated.
Select pieces are made to order — see the product page for current lead time before ordering.
Materials and care
Alabaster, marble & stone: dust with a soft, dry cloth. Avoid water and household cleaners — they can etch or stain natural stone.
Brass & metal finishes: wipe with a dry microfiber cloth. Avoid abrasive cleaners, which will strip the patina.
Fabric shades: spot clean only with a dry cloth.
Glass: apply a mild glass cleaner to a soft cloth, not directly to the fixture.
Always turn off and let the fixture cool before cleaning.
Keep fixtures away from direct moisture unless the listing specifies it's rated for outdoor or wet locations.
Styling tips
Wall sconces: mount at 60–66″ from the floor to the center of the fixture; space paired sconces 24–30″ apart.
Pendants: hang 30–36″ above a table or counter surface, adjusting for ceiling height.
Chandeliers: as a general sizing guide, allow roughly 2.5–3″ of fixture width for every foot of room width.
Warmer bulb temperatures (2700K–3000K) bring out the tone in natural materials like alabaster and brass.
Pairing with a dimmer switch gives you more control over ambiance in living and dining spaces.
