Bela Marble Wall Lamp

$195.00 CAD

Sale Sold out

Size 1 head D 12cm x H 35cm / ∅ 4.7″ x H 13.7″ 2 heads D 12cm x H 44cm / ∅ 4.7″ x H 17.3″ 3 heads D 12cm x H 60cm / ∅ 4.7″ x H 23.6″

Finishes White Marble

Italian Marble · Opaline Glass · Mid-Century Form

A wall-mounted sculpture in two materials. An opaline glass globe rests against a slab of Italian marble — borrowed from the elegance of pearls on a silver tray, filtered through the vivid optimism of mid-century Italian design.

Each marble slab is prized for its bold grey veining. No two pieces arrive alike; each carries its own quiet signature, cut from stone that took centuries to form.

See It In Action

Product Overview Watch on YouTube ↗

Configuration — Choose at Checkout

Single — 1 Head

D 12 × H 35 cm

∅ 4.7″ × H 13.7″

1.74 kg / 3.8 lbs

Double — 2 Heads

D 12 × H 44 cm

∅ 4.7″ × H 17.3″

2.3 kg / 5.1 lbs

Triple — 3 Heads

D 12 × H 60 cm

∅ 4.7″ × H 23.6″

3.5 kg / 7.7 lbs

Materials & Craft

◧

Marble

Italian marble with bold grey veining. Each piece uniquely patterned.

○

Opaline Glass

Hand-blown globe shade. Softens the light into a warm, diffused glow.

✦

G9 Socket · 110V

Bi-pin AC 110V base. Bulb sold separately — LED recommended.

Product Notes

G9 Bulb not incl.

Horizontal or Vertical Flexible mounting

Hardwired Wall installation

Dimensions	1 Head: D 12 × H 35 cm / ∅ 4.7″ × H 13.7″ 2 Heads: D 12 × H 44 cm / ∅ 4.7″ × H 17.3″ 3 Heads: D 12 × H 60 cm / ∅ 4.7″ × H 23.6″
Weight	1 Head: 1.74 kg / 3.8 lbs 2 Heads: 2.3 kg / 5.1 lbs 3 Heads: 3.5 kg / 7.7 lbs
Body material	Marble (Italian)
Shade material	Opaline Glass
Color	White
Socket	G9 Bi-Pin Base
Voltage	AC 110V only
Wiring	Hardwired
Orientation	Horizontal or Vertical
SKU	RDW-172513

Installation

Hardwired wall installation — licensed electrician recommended.
Mounts horizontally or vertically — orient to suit your wall composition.
Marble is natural stone — handle carefully during installation to avoid chipping.
For indoor use only. Not rated for bathrooms or damp locations.

FAQ

Why must the bulb be 110V AC? +

This fixture is wired for direct 110V AC mains power. G9 bulbs are made almost exclusively for mains voltage, but always confirm the packaging reads G9 / AC 110–120V before installing — a low-voltage bulb will fail immediately or damage the fixture.

Which bulb do you recommend? +

A warm white (2700K) G9 AC 110V LED bulb at 2–3W gives the most flattering glow through the opaline shade. LED is strongly preferred — it runs cool, lasts longer, and won't heat-stress the marble or glass.

Can I mount it horizontally? +

Yes. The fixture is designed to work in either orientation — vertical (heads pointing up or down) or horizontal (heads pointing left or right). Choose whichever suits your wall composition.

Is the lamp dimmable? +

Yes, when paired with a dimmable G9 110V LED bulb and a compatible TRIAC dimmer switch. Confirm the bulb's dimmer compatibility list before installing.

Will the marble veining vary between units? +

Yes — significantly. Each marble back is cut from a single slab of natural Italian marble, so veining patterns, density of grey, and subtle tonal differences vary between every piece. No two are identical; this natural variation is the core character of the material.

What about the 1-head vs 2-head vs 3-head versions? +

All three share the same diameter (12 cm / 4.7″) and mounting footprint — they differ only in overall length. Pick the 1-head for tight spots (bedside, narrow hallway), 2-head for balanced bedroom or living-room use, and 3-head for a taller statement above a console or in a stairwell.

Downloads

↓ Spec Sheet ↓ Install Guide ↓ 3D File 1 ↓ 3D File 2

Product features

Hand-finished in natural materials — alabaster, marble, brass, and blown glass — so slight variation in veining, grain, or patina between pieces is normal and expected.
Hardwired or plug-in per listing; check the individual product page for the exact wiring type and included cord length.
Compatible with standard dimmer switches unless the listing notes otherwise.
Bulb base type (e.g. E12, E26) is listed on each product page; bulbs are not included unless stated.
Select pieces are made to order — see the product page for current lead time before ordering.

Materials and care

Alabaster, marble & stone: dust with a soft, dry cloth. Avoid water and household cleaners — they can etch or stain natural stone.
Brass & metal finishes: wipe with a dry microfiber cloth. Avoid abrasive cleaners, which will strip the patina.
Fabric shades: spot clean only with a dry cloth.
Glass: apply a mild glass cleaner to a soft cloth, not directly to the fixture.
Always turn off and let the fixture cool before cleaning.
Keep fixtures away from direct moisture unless the listing specifies it's rated for outdoor or wet locations.

Styling tips

Wall sconces: mount at 60–66″ from the floor to the center of the fixture; space paired sconces 24–30″ apart.
Pendants: hang 30–36″ above a table or counter surface, adjusting for ceiling height.
Chandeliers: as a general sizing guide, allow roughly 2.5–3″ of fixture width for every foot of room width.
Warmer bulb temperatures (2700K–3000K) bring out the tone in natural materials like alabaster and brass.
Pairing with a dimmer switch gives you more control over ambiance in living and dining spaces.

View full details

Your cart
Variant	Variant total	Quantity	Price	Variant total
1 head D 12cm x H 35cm / ∅ 4.7″ x H 13.7″ / White MarbleRDW-172513-01	1 head D 12cm x H 35cm / ∅ 4.7″ x H 13.7″ / White MarbleRDW-172513-01 $195.00/ea	$0.00	Quantity	$195.00/ea	$0.00

2 heads D 12cm x H 44cm / ∅ 4.7″ x H 17.3″ / White MarbleRDW-172513-02	2 heads D 12cm x H 44cm / ∅ 4.7″ x H 17.3″ / White MarbleRDW-172513-02 $248.00/ea	$0.00	Quantity	$248.00/ea	$0.00

3 heads D 12cm x H 60cm / ∅ 4.7″ x H 23.6″ / White MarbleRDW-172513-03	3 heads D 12cm x H 60cm / ∅ 4.7″ x H 23.6″ / White MarbleRDW-172513-03 $305.00/ea	$0.00	Quantity	$305.00/ea	$0.00